Product Category

Quick Search

Zoom in

Model：01GS60R-75 01GS60R-100

The standard configuration is stepper motor, realizing automatic tilt adjustment and automatic control.
Adopt fine grinded ball screw drive. And the screw is placed in the middle to save space.
Adopt arc guide rail to roll, running smoothly, integrated base. Higher stability.
Adopt imported high quality elastic coupling to realize flexible connection and eliminate air return and machining error.
Photoelectric limit switch on left and right sides can protect the products effectively with zero position switch.
Pairs of design, can be assembled into a two - dimensional motorized rotary stage or can be used alone. Two designed radius of rotation that assembled can be cross rotated around a common point.
Limit and zero circuit boards can be set left and right.
Standard installation holes are suitable to assemble multi-axis motorized stages that are convenient to combine with other products of our company.
Servo motor can be equipped for higher speed and accuracy.

C．Wiring instructions（Interface DB9 head）

DB9 pin	signal name	connections of motorized tilt stages	Wire color
1	Zero position switch	Zero position switch photosensitive tube positive pole	white
2	low limit switch	close to motor switch photosensitive tube positive pole	red
3	high limit switch	Away from the motor switch photosensitive tube positive pole	blue
4	negative pole of a photoelectric switch power supply	Three negative pole of photoelectric switch	black
5	Positive pole of photoelectric switch power supply	switch light emitting tube positive pole (from DC12V to DC24V)	黃
6	stepper motor A phase positive pole	A＋	red
7	stepper motor A phase negative pole	A－	blue
8	stepper motor B phase positive pole	B＋	black
9	stepper motor B phase negative pole	B－	green

D． Encoder (optional) wiring

10,000 pulses per cycle of encoder

E．Stepper motor parameters

model：28HB31F095M, stepping angle： 1.8°, phase：2, voltage：2.66V, current：0.95A；

resistance：2.8Ω, inductance：2.3mH, Static moment：6N.cm